Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
projects:wobbler:setup [2019/01/12 15:26]
robin
projects:wobbler:setup [2019/01/12 15:27] (current)
robin
Line 32: Line 32:
 There are two possible Joystick mounts: There are two possible Joystick mounts:
  
-  * The wooden base of the Joystick is glued onto the acrylic box of the controller, which itself is fixed to a surface by industrial double-sided tape. This is best suited for short exhibitions that last less than a week. Refer to the PDF manual ​above for setup and teardown ​instructions +  * The wooden base of the Joystick is glued onto the acrylic box of the controller, which itself is fixed to a surface by industrial double-sided tape. This is best suited for short exhibitions that last less than a week. Refer to the [[http://​linewobbler.com/​Line%20Wobbler%20Manual.pdf|PDF manual]] for setup and tear-down ​instructions 
-  * The wooden base of the Joystick is wider and extends beyond the acrylic box, and is fixed to the surface directly via long metal rods, such as in this picture:+  * The wooden base of the Joystick is wider and extends beyond the acrylic box, and is fixed to the surface directly via long metal rods, such as in the picture ​below. You will need to prepare the surface yourself by drilling holes and provide your own screws / rods.
  
 {{ :​projects:​wobbler:​dsc08843.jpg?​600 |}} {{ :​projects:​wobbler:​dsc08843.jpg?​600 |}}

Follow me for my newest experiments: